This attractive, modular bath step has been specifically designed to make daily activities, especially getting into and out of the bath, easier.

 The large surface area gives the user confidence and the textured surface provides additional safety. Supplied as a single step with a 100mm (4") raise, the modularity of the Savanah Bath Step allows it to be stacked on top of each other or clipped together to give a larger area or create a small stair.

Each additional step adds an extra 50mm (2") to the height of the step, up to a maximum of six steps, (giving a 355mm (14") raise). Both sides of the step have a curved cut out near the floor, allowing it to be picked up and moved around easily. A foam pad is supplied that fits neatly onto the surface of the step, making it both warm and soft underfoot. Surface area 356 x 457mm (14 x 18").
Footprint 381 x 483 (15 x 19").

Ref. AA1824W   Non retail
Max. user weight: 30st / 190kg

This strong, lightweight step has a large textured area and central lifting hole. The step rests on non-slip pads for safety and is reversible to provide either a 4" or 6" step.

Length 530mm (20 3/4"). Width 350mm (13 3/4"). Weight 1.6kg.


Max. user weight: 30st / 190kg.

Please note due to the length of the above items a additonal £ 2.00 p & p is required this will be shown when you proceed with your order.

Please note due to the length of the above items a additonal £ 2.00 p & p is required this will be shown when you proceed with your order.

Providing a firm handle at the bath side, this rail helps give confidence and stability when getting in and out of the bath. The coated steel rail is fixed to the side of the bath by a stainless steel clamp, cushioned on the inside by rubber pads.

Length 457mm (18"). Height above bath side 349mm (13 3/4").
Clamp width adjustment 83 - 140mm (3 1/4 - 5 1/2").

This rail clamps firmly around the taps and provides a hinged support bar over the bath for assisting with raising and lowering. The crossbar has extended sides to sit on the rims of the bath and the rail can be folded back out of the way when not in use. Plastic end caps are fitted to help protect the bath.

Max diameter of taps 80mm (3 1/8").
Length from taps 325mm (12 3/4").
Width of crossbar 675mm (26 1/2"). Weight 1.6kg.

Please note due to the length of the above items a additonal £ 2.00 p & p is required this will be shown when you proceed with your order.

A hinged support all which is fixed to the end wall over the bath. Useful when the taps are not suitable or strong enough for a tap mounted rail.

The rail must be securely fitted to a sound solid wall.

Length from taps 475mm (18 3/4"). Internal width 33mm (13").
Width of crossbar 675mm (26 1/2"). Weight 2.1kg.

Please note due to the length of the above items a additonal £ 2.00 p & p is required this will be shown when you proceed with your order.